Telephone Access Module

Feature of Product
  • Interfaces a telephone system with a paging system to allow paging announcements to be made through any telephone updated version of the venerable TAMB, functionally the same
  • Loop start, ground start, & station port (90V ring up) compatibility
  • Bi-directional for two-way systems
  • Rack-mount or wall-mount; half-rack width units can be mounted side-by-side
  • Background music input with volume control
  • UL60950 listed; FCC registered
  • Power supply required (not included)

Specification
  • Loop start, ground start, and station port (90V ring up) compatibility
  • 600-ohm output
  • Pre-announce and confirmation tones (defeatable)
  • Adjustable tone volume
  • Works with paging only and two-way (talk back) systems
  • Background music input with volume control
  • Suppresses background music during paging
  • Station access disconnect is dynamically controlled using a combination disconnect timer, and VOX disconnect timer or Calling Party Control (CPC) signal detection
  • Station port maximum page times from 1- 200 seconds
  • Disconnect VOX timer is adjustable from 1 to 11 seconds of silence
  • VOX and default timers independently inhibitable
  • Calling Party Control (CPC) signal from switch immediately disconnects station port
  • 24V Talk Battery
  • 1 Rack space unit height
  • Flexible Mounting Configuration: wall, single unit rack, and dual side-by-side rack mount
  • Easily accessible controls and switches
  • Trunk Timer feature helps prevent system blockage
  • 24V power supply required for all modes of operation (150mA min. capacity)
  • 1 C-Form (N.O. and N.C.) contact pair available for operating external equipment
  • Pluggable terminal strip connectors
  • FCC Part 68 registered; ETL Listed